We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

Page Bookmarked

AR# 964

*Obsolete* - XChecker - DOS produces a frame error - INIT goes low


Keywords: xchecker, init, bitstream

Urgency: Standard

General Description:
In the Xchecker software, frame errors occur regularly, and baud rate is set to the highest setting.


The serial ports on some older PCs cannot deliver the bitstream at higher baud rates, such as 115,200. Lower the baud rate. The XChecker command, at the
Xchecker command line, for this is:

baud <baud_rate>

Example: baud 9600
AR# 964
Date 09/26/2005
Status Archive
Type ??????