AR# 9904: 4.2i SP3 Install - Readme file for 4.2i Service Pack 3 for Solaris, HP-UX, and PC users
AR# 9904
|
4.2i SP3 Install - Readme file for 4.2i Service Pack 3 for Solaris, HP-UX, and PC users
Description
Keywords: Service Pack, Readme, Solaris, HP-UX, UNIX, PC, software, update, 4.2isp3, Service Pack 3
Urgency: Standard.
General Description: This answer record contains information on the Readme file for 4.2i Service Pack 3 for Solaris, HP-UX, and PC users.
Solution
Successful installation of Xilinx ISE 4.2i Service Pack 3 will update the software version number to 4.2.03i.
NOTE 1: The destination directory specified during the setup operation must contain an existing Xilinx ISE 4 installation. Only existing files will be updated. Any new device support not previously installed should first be installed from the Xilinx ISE 4 CD before the Service Pack update is added.
NOTE 2: The Xilinx ISE 4 environment variable should be set before commencing installation of Service Pack 3.
Single download installation instructions for Solaris users: 1. Download 4_2_03i_sol.tar.gz from http://www.xilinx.com/xlnx/xil_sw_updates_home.jsp 2. Untar the downloaded file into an empty "staging" directory.
For example: cd /home/staging_dir gzip -d 4_2_03i_sol.tar.gz tar xvf 4_2_03i_sol.tar
3. Run "4_2_03i_sol/setup".
Single download installation instructions for HP-UX users: 1. Download 4_2_03i_hp.tar.gz from http://www.xilinx.com/xlnx/xil_sw_updates_home.jsp. 2. Untar the downloaded file into an empty "staging" directory.
For example: cd /home/staging_dir gzip -d 4_2_03i_hp.tar.gz tar xvf 4_2_03i_hp.tar