CORE Generator
Changing the Target Device
Use this procedure to change the Xilinx® FPGA to which you are targeting your design. When you change the target device, all IP generated afterwards are generated for the new device.
To Change the Target Device
  1.  Select Project > Project Options.
  2.  In the Part Panel of the Project Options dialog box, specify the device to which you want your IP to be targeted.
  3.  Click OK.
    For project options to apply the next time the project is opened, the project must be saved before it is closed. An asterisk (*) in the title bar indicates that project options have changed and the project must be saved for the options to persist.
Any IP generated afterwards in the current project are generated according to the new device settings, and these device settings remain with the project when you save the project.
IP that is generated before the device is changed, must be regenerated to be targeted to the new device.
See Also

© Copyright 1995–2009, Xilinx® Inc. All rights reserved.