CORE Generator
Setting Project Options
Use this procedure to set or change these options for the current CORE Generator™ project:
  •  The Xilinx® FPGA to which you are targeting your design.
  •  The output files that are produced when IP is generated within the project.
  •  Advanced options that affect the IP generated within the current project.
To Set Project Options
  1.  Select Project > Project Options, or click the Project Options toolbar button Image.
  2.  In the Project Options dialog box, enter your changes to the applicable panels.
  3.  Click OK.
  4.  If you want the project options to apply the next time the project is opened, save the project.
    An asterisk (*) in the title bar indicates that project options have changed and the project must be saved for the options to persist.
Once the procedure is completed, the project options you specified are applied to the current project. Any IP generated afterwards are generated according to the new settings, and these settings remain with the project when you save the project.
See Also

© Copyright 1995–2009, Xilinx® Inc. All rights reserved.