CORE Generator
Starting the CORE Generator
To Start the CORE Generator software
  •  On a Windows system:
    •  Select Start > Programs > Xilinx ISE Design Suite > ISE Accessories > CORE Generator.
    •  Select Start > Run in Windows. At the command prompt, type coregen.
  •  On a UNIX or Linux workstation: At a shell prompt, type coregen.
  •  Start the CORE Generator™ software from within Xilinx® ISE® (see Starting the CORE Generator within Xilinx ISE) or
Once the procedure is completed, the CORE Generator window opens. If you have enabled the Open previous Project on startup preference, the last project you worked on in CORE Generator is opened in the window.
See Also

© Copyright 1995–2009, Xilinx® Inc. All rights reserved.