iMPACT
Supported Cables
iMPACT supports the following cables:
iMPACT Supported Cables
NamePlatformsVoltagesModesDefault Cable Speeds
Parallel Cable IV (Model DLC7)PC1.5, 1.8, 2.5, 3.3, 5VBoundary-Scan 5 MHz
Platform Cable USB,
Platform Cable USB II
PC1.5, 1.8, 2.5, 3.3, 5VBoundary-Scan6 MHz
Digilent CablesPC1.5, 1.8, 2.5, 3.3, 5VBoundary-Scan10 MHz
Parallel Cable IV
Parallel Cable IV is high-speed download cable that attaches to your computer's parallel port for the purpose of programming or configuring any of the following devices:
  • Xilinx® ISP configuration PROMs
  • Xilinx CPLDs
  • Xilinx FPGAs
  • Select third-party SPI PROMs
  • Select third-party BPI PROMs
Platform Cable USB/USB II
Platform Cable USB and Platform Cable USB II are high-performance download cables that attach to the USB port of your computer for the purpose of programming or configuring any of the following Xilinx devices:
  • Xilinx ISP configuration PROMs
  • Xilinx CPLDs
  • Xilinx FPGAs
  • Select third-party SPI PROMs
  • Select third-party BPI PROMs
Digilent Cables
Digilent JTAG-SMT1 and JTAG-HS1 Cables are high-performance download cables that attach to the USB port of your computer for the purpose of programming or configuring any of the following Xilinx devices:
  • Xilinx FPGAs
  • Select third-party SPI PROMs
  • Select third-party BPI PROMs
  • Xilinx CoolRunner™/CoolRunner-II CPLDs
  • Xilinx Platform Flash ISP configuration PROMs
The following features are not supported by the Digilent JTAG-SMT1 or JTAG-HS1 Cables:
  • Xilinx 9500/9500XL CPLD programming or configuration
  • Xilinx 1700 or 18V00 ISP configuration PROM programming or configuration
  • Xilinx FPGA eFUSE programming
  • Remote device configuration

© Copyright 1995–2012, Xilinx® Inc. All rights reserved.