We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 21521

7.1 System Generator - Is the Simulink "accelerator" simulation mode supported?


General Description:

When simulating a System Generator design in Simulink, if I change the Simulink simulation mode

to "Accelerator", the simulation does not work and fails with errors.

Is this flow supported?


No, the "Accelerator" simulation mode is not supported and is not compatible with System Generator.

You will need to set the simulation mode to "Normal" to get your simulation to work.

As a possible workaround to speed up your simulation, you may wish to consider performing

Hardware in the Loop simulation. This flow can considerably speed up simulation run-times.

More information on this flow is available in the System Generator User Guide:


AR# 21521
Date Created 05/27/2005
Last Updated 12/15/2012
Status Active
Type General Article