UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 37083

iMPACT Indirect BPI Programming - Cable speed is limited to a maximum of 3 MHz

Description


When I set my cable speed as 6 MHz, it resets to 3 MHz in the log.
How do I select a cable speed that is over 3 MHz?

Solution

The cable speed is limited to a maximum of 3 MHz for all devices from 12.1 forward. If you select a higher speed, this results in the speed being reset to 3 MHz.
AR# 37083
Date Created 07/28/2010
Last Updated 12/15/2012
Status Active
Type General Article
Devices
  • Spartan-3A
  • Spartan-3A DSP
  • Spartan-3AN
  • More
  • Spartan-3E
  • Spartan-6 LX
  • Spartan-6 LXT
  • Virtex-5 FXT
  • Virtex-5 LX
  • Virtex-5 LXT
  • Virtex-5 SXT
  • Virtex-5 TXT
  • Virtex-5Q
  • Virtex-5QV
  • Virtex-6 CXT
  • Virtex-6 HXT
  • Virtex-6 LX
  • Virtex-6 LXT
  • Virtex-6 SXT
  • Virtex-7
  • Less