UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 37435

Project Navigator - How to display the absolute paths for source files in the Sources window?

Description

How can I displaythe absolute or relative source file paths in the Sources window in Project Navigator?

Solution

The menu to control the source file paths display is different among different ISE versions. See following screenshots for details.
  • ISE 10.1

In ISE 10.1, you can display the absolute source file paths only when the files areput in remotelocation (not in the project directory). Use "Toggle Paths" command in thecontext-sensitive menu when you right click on the top level source file.


  • ISE 11.x

In ISE 11.x, use "Display Full Paths" command inthecontext-sensitive menu when you right click on the top level source file.
  • ISE 12.x -

In ISE 12.1 and later, use "File/Path Display" command inthecontext-sensitive menu when you right click on the top level source file.


AR# 37435
Date Created 10/14/2010
Last Updated 12/15/2012
Status Active
Type General Article
Tools
  • ISE - 10.1
  • ISE Design Suite - 11.1
  • ISE Design Suite - 11.2
  • More
  • ISE Design Suite - 11.3
  • ISE Design Suite - 11.4
  • ISE Design Suite - 11.5
  • ISE Design Suite - 12.1
  • ISE Design Suite - 12.2
  • ISE Design Suite - 12.3
  • Less