UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 40554

12.x/13.1 iMPACT - What is the batch command for identifying a programming cable ESN?

Description

What is the batch command to identify a programming cable ESN in iMPACT Help?

Solution

The following command is to be added to iMPACT Help in iMPACT 13.1.

============================================================
listusbcables [-host <hostname>]

If -host is not specified, enumerate the cables connected to the local machine. Otherwise, enumerate the USB cables connected to the remote host; the server application (cse_server) must be running in the remote host, in this case.
============================================================

Following are the sample console messages when the command is run:

>listusbcables
Enumerating cables. Please wait.
Connecting to cable (Usb Port - USB21).
Checking cable driver.
Driver file xusbdfwu.sys found.
Driver version: src=1027, originalAttribute="src" originalPath="1027," originalAttribute="src" originalPath="1027," originalAttribute="src" originalPath="1027," originalAttribute="src" originalPath="1027," originalAttribute="src" originalPath="1027," dest=1027.
Driver windrvr6.sys version = 10.2.1.0. WinDriver v10.21 Jungo (c) 1997 - 2010
Build Date: Aug 31 2010 X86 32bit SYS
14:35:41, version = 1021.
=======================================================
Found cable - > ESN = 00000BD8764401.
=======================================================
Connecting to cable (Usb Port - USB22).
Checking cable driver.
Driver file xusbdfwu.sys found.
Driver version: src=1027, originalAttribute="src" originalPath="1027," originalAttribute="src" originalPath="1027," originalAttribute="src" originalPath="1027," originalAttribute="src" originalPath="1027," originalAttribute="src" originalPath="1027," dest=1027.
Driver windrvr6.sys version = 10.2.1.0. WinDriver v10.21 Jungo (c) 1997 - 2010
Build Date: Aug 31 2010 X86 32bit SYS
14:35:41, version = 1021.

List of available USB cables
==============================
port=usb21, esn=00000BD8764401
==============================

Specify either the port or the ESN value from the list to the "setcable" command to select a specific cable.


For example:

"setcable -port usb2x"



or

"setcable -port usb21 -esn xxxxxxxxxxxxxx"
AR# 40554
Date Created 02/10/2011
Last Updated 02/10/2011
Status Active
Type General Article
Tools
  • ISE Design Suite - 12.1
  • ISE Design Suite - 12.2
  • ISE Design Suite - 12.3
  • More
  • ISE Design Suite - 12.4
  • ISE Design Suite - 13.1
  • Less