We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 42484

Virtex-6 - GTH - RX Input Sensitivity Measurement Methodology


Under what circumstances was the RX sensitivity (DVPPIN) characterization done?


As this spec in the data sheet is an absolute minimum, the RX termination will not affect this. 

However, the characterization was measured with all settings and the characterization report published on the external web used an EQ of 4 or 6. 

Also, as there is not significant loss in the test fixture, the RX input sensitivity is very similar for all even settings. 

The DFE for this characterization was turned off.

AR# 42484
Date 10/02/2014
Status Archive
Type General Article
  • Virtex-6 HXT
Page Bookmarked