This Answer Record provides information on general board level debug for MCB designs using MIG.The information provided in this Answer Record should be the starting point in any hardware debug of a memory interface design.
NOTE: This Answer Record is part of the Xilinx MIG Solution Center (Xilinx Answer 34243). The Xilinx MIG Solution Center is available to address all questions related to MIG. Whether you are starting a new design with MIG or troubleshooting a problem, use the MIG Solution Center to guide you to the right information.
For detailed information on Verify Memory Implementation Guidelines, refer to:
Each of these steps is detailed in the Debug Guide provided withSpartan-6 FPGA Memory Interface Solutions User Guide (UG416); see the Debugging MCB Designs section:http://www.xilinx.com/support/documentation/ip_documentation/mig/v3_8/ug416.pdf
To open a WebCase, go to: