UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 44014

13.3 EDK - Does EDK support VCS simulation?

Description

Whenwill EDK support VCS as a simulator?

Solution

While some access to VCS was enabled in 13.3, there are some issues with Xilinx IP.One EDK 13.3 issuegives incorrect resultswhen simulating MicroBlaze LUT6_2 primitives, and another known issue is the lack of support of uselib in the axi_vdma core. Therefore, the use of VCS in EDK 13.3 is not recommended.

General EDK VCS simulationsupport will be available with EDK 13.4, using VCS version 2011.12 or later. However, AXI BFMs might not be supported in VCS until 14.1.

AR# 44014
Date Created 11/30/2011
Last Updated 12/15/2012
Status Active
Type General Article
Tools
  • EDK - 13.3
IP
  • AXI Video DMA
  • Microblaze