UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 44810

SDK 13.2 - Unable to Debug Assembly File Using a Breakpoint

Description

In the EDK software, afteradding a breakpoint to the assembly file and running the debugger, it appears that the debugger will not jump into the assembly file and stop on the breakpoint. The following warning is shown: "Unresolved breakpoint."

Solution

The assembly file was created using lower case "s", for example,test.s. An upper case "S" is needed for the file, for example, test.S, so that the debugger can link to the assembly file. Simply changing the file from an.s to .S can cause problems,therefore, it is recommended that you create a new file with .S instead. With this change, the debugger automatically changes from asm to c according to which file it isin:"Current language: auto; currently asm" and "Current language: auto; currently c."
AR# 44810
Date Created 11/15/2011
Last Updated 12/15/2012
Status Active
Type General Article
Devices
  • Spartan-6 LXT
Tools
  • ISE Design Suite - 13.2