We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 51601

14.2 EDK/ XPS_SYSMON_ADC v3.00b - Incorrect error message in DRC check when disabling interrupt of the IP


I generate a BSB design and add this core in the system.

After disabling interrupt and making the necessary connections in the system, I receive this error in the console:

ERROR:EDK:3900 - issued from TCL procedure "::hw_xps_sysmon_adc_v3_00_b::check_syslevel_settings" line 11
xps_sysmon_adc_0 (xps_sysmon_adc) -
 The port IP2INTC_Irpt of xps_sysmon_adc_0 is connected but no interrupt control logic is included.




This error message is incorrect and can be ignored.

The IP2INTC_Irpt is not connected anywhere when interrupt is disabled. 

A CR has been filed for this to be fixed in a future release.

AR# 51601
Date Created 09/03/2012
Last Updated 10/02/2014
Status Active
Type General Article
  • FPGA Device Families
  • EDK - 14
  • XPS SYSMON Analog Digital Converter (ADC)