We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 59327

PetaLinux 2013.10 - Device Tree Generator does not connect interrupt lines for 7 series PCIe blocks


I have connected the interrupt_out pin on the 7 series PCIe block to the Zynq PS7 interrupt lines in my IPI block diagram, but the PetaLinux device tree generator does not connect set the "interrupts" and "interrupt-parent" parameters in the PCIe peripherals' DTS node.


This is a known issue in PetaLinux 2013.10.

As a work-around, manually declare the "interrupts" and "interrupt-parent" parameters in the DTS file located in the <PETALINUX_PROJECT>\subsystems\linux\hw-description\system.dts file.

AR# 59327
Date Created 02/05/2014
Last Updated 02/10/2014
Status Active
Type General Article
  • SoC
  • Zynq-7000
  • PetaLinux
  • Vivado Design Suite
  • PetaLinux - 2013.10
  • PCI-Express (PCIe)
  • 7 Series Integrated Block for PCI Express (PCIe)