We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 59478

2013.4 SDK: How to connect to 2 Digilent JTAG adapters on the same host


There is no GUI option to select which digilent cable to use during debugging if more then 1 cable is connected.


The workaround is to connect to a specific cable with an XMD option that targets the ESN of the cable.

For Example:
connect mb mdm -cable type xilinx_plugin modulename digilent_plugin modulearg [list "DEVICE=SN:210205813045"] 

SDK can than use "remote debug" and connect to the XMD session.

AR# 59478
Date Created 02/19/2014
Last Updated 05/16/2014
Status Active
Type General Article
  • Vivado Design Suite - 2013.4