UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 67241

HDMI Receiver Subsystem v2.0 - Why do I see that the start-of-block bit is only being set for the Channel 0-1 pair and not for the other audio pairs?

Description

Why do I see that the start-of-block bit is only being set for the Channel 0-1 pair and not for the other audio pairs?

Solution

This is a known issue in the HDMI Receiver Subsystem v2.0. It is resolved in the HDMI Receiver Subsystem v2.0 (Rev. 1) in Vivado 2016.2 and later.

Linked Answer Records

Master Answer Records

Answer Number Answer Title Version Found Version Resolved
54546 HDMI Receiver (Rx) Subsystem - Release Notes and Known Issues for the Vivado 2013.1 tool and later versions N/A N/A
AR# 67241
Date Created 05/17/2016
Last Updated 06/08/2016
Status Active
Type General Article
IP
  • HDMI