We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 31965

iMPACT 10.1 - Cannot select properties on Slave device in Serial Daisy Chain


When using the CLKOUT feature in XCFxxp PROMS, if you have a Serial daisy chain, you cannot modify the Slave device properties with the iMPACT GUI. They are greyed out.


To work around this issue, you need to use batch mode and use the -master switch on the slave device to be able to enable the down stream device properties.

This issue is fixed in 11.1.

AR# 31965
Date 12/15/2012
Status Active
Type General Article
Page Bookmarked