We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 35528

MIG v3.6 - Tool commands are not recognized when running ise_flow.bat


MIG provides a ise_flow script in the ./par directory that automatically implements the MIG design.

Starting with ISE Design Suite 12.1, the tool environment does not automatically set up during the installation of the ISE tools. Consequently, the ise_flow script fails to recognize the commands.


It is necessary to set up the tool environmentbefore implementing designs. To do this, run settings32/64.bat script located in your ISE installation (e.g.,C:\Xilinx\12.3\ISE_DS\settings32.bat) and then run ise_flow.bat. After running this file, the ise_flow script willrun properly.
AR# 35528
Date Created 06/08/2010
Last Updated 10/10/2013
Status Active
Type General Article
  • MIG