UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 37304

FPGA Editor - How can I add an IDDR/ODDR component?

Description

The IOLOGIC component can be configured as IOSERDES or IOLOGIC (IDDR/ODDR/ISDR/OSDR).

How can I add an IDDR/ODDR in FPGA Editor?

Solution


When you add an I(O)LOGIC component in FPGA Editor, a window appears asking you enter the component name and component type.

To configure it to I(O)LOGIC, (which means I(O)DDR/I(O)SDR), select I(O)LOGIC/I(O)LOGIC1/I(O)LOGIC2 in the type pull-down list.

To configure it to I(O)SERDES/I(O)SERDES1/I(O)SERDES2, select I(O)SERDES in the type pull-down list.

See the following examples.
 
  • For Virtex-4 devices, the default type is I(O)SERDES



  • For Virtex-5/Spartan-6/Virtex-6 devices, the default type is I(O)LOGIC



AR# 37304
Date Created 08/08/2010
Last Updated 09/30/2014
Status Active
Type General Article
Tools
  • ISE Design Suite