UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 5133

Virtex - Do any power sequencing issues exist for VCCINT, VCCO, and VREF?

Description

For Virtex, do any issues exist regarding the order in which you power up the different voltage supplies?

NOTE: For information on Virtex-E power sequencing, please see (Xilinx Answer 10129).

Solution

There are no restrictions on the order of VCCO, VCCINT, and VIN power applications. For more information, please see the Virtex Data Sheet -> Module 3 Electrical Characteristics -> DC Characteristics:
http://www.xilinx.com/support/documentation/data_sheets/ds003.pdf

Device lifetime information is provided in the Quality and Reliability report:
http://www.xilinx.com/support/documentation/user_guides/ug116.pdf
(Check the Quarterly report for Device Hour.)

If, after power-up, the VCCINT is lost, the I/Os will go into a 3-state condition and return to their pre-configuration state. If VCCO is lost to Banks 2 and 3, the device will also lose its configuration.

AR# 5133
Date Created 08/21/2007
Last Updated 02/26/2013
Status Active
Type General Article
Devices
  • Virtex