We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 51668

Xilinx MIG 7 Series Solution Center Design Assistant - Simulation Parameters


This section of the MIG 7 Series Design Assistant focuses on the Simulation Parameters for MIG 7 series designs. Below you will find information related to this topic.

Note: This article is part of the Xilinx MIG Solution Center (Xilinx Answer 51313). The Xilinx MIG Solution Center is available to address all questions related to MIG. Whether you are starting a new design with MIG or troubleshooting a problem, use the MIG Solution Center to guide you to the right information.


A complete list of the simulation parameters and their descriptions can be found in the 7 Series FPGAs Memory Interface Solutions User Guide (UG586), see the "Getting Started with the CORE Generator Tool" -> "Modifying the Example Design" section, Table 1-11, and "Customizing the Core," Table 1-36.

Revision History
09/20/12- Initial Release

Linked Answer Records

Master Answer Records

Answer Number Answer Title Version Found Version Resolved
51666 Xilinx MIG 7 Series Solution Center Design Assistant - Simulation N/A N/A
AR# 51668
Date 02/28/2013
Status Active
Type Solution Center
  • Artix-7
  • Kintex-7
  • Virtex-7
  • MIG 7 Series
Page Bookmarked