This answer record contains the Release Notes and Known Issues for the LogiCORE IP S/PDIF core and includes the following:
This Release Notes and Known Issues Answer Record is for the core generated in Vivado 2013.1 and newer tool versions.
For past known issue logs and ISE support information, see the IP Release Notes Guide (XTP025):
LogiCORE IP S/PDIF Core Page:
Supported devices can be found in the following three locations:
For a list of new features and added device support for all versions, see the Change Log file available with the core in Vivado.
Table 1 correlates the core version to the first Vivado design tools release version in which it was included.
Table 1: Version
|Core Version||Vivado Tools Version|
|v2.0 (Rev. 3)||2013.4|
|v2.0 (Rev. 2)||2013.3|
|v2.0 (Rev. 1)||2013.2|
Table 2 provides answer records for general guidance when using the LogiCORE IP S/PDIF core.
Table 2: General Guidance
Known and Resolved Issues
The following table provides known issues for the LogiCORE IP S/PDIF core, starting with v2.0, initially released in Vivado Design Suite 2013.1.
Note: The "Version Found" column lists the version the problem was first discovered. The problem might also exist in earlier versions, but no specific testing has been performed to verify earlier versions.
|Answer Record||Title||Version Found||Version Resolved|
|(Xilinx Answer 59555)||Where can I find the XDC constraints for this IP?||v2.0 (Rev. 2)||N/A|
02/26/2014 - Added v2.0 (Rev. 3) Version Table and (Xilinx Answer 59555)
10/23/2013 - Added v2.0 (Rev. 1) and v2.0 (Rev. 2) to Version Table
04/03/2013 - Initial release