We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 56988

Vivado Simulator - State machine decoding / enumerating in waveform viewer


Is it possible to get the Vivado Simulator (and Vivado debugger) to enumerate state machines?

I wish to see the actual state names as they were originally enumerated in the HDL code.

For example: start, wait , stop etc.



To do this, click on Top_tb (or whatever the testbenches name is) to show the unit under test (uut) which will show the signals within the module.
These can then be dragged into the waveform screen and you can see the state names when you zoom in.

Linked Answer Records

Master Answer Records

Answer Number Answer Title Version Found Version Resolved
58882 Xilinx Simulation Solution Center - Design Assistant - Vivado Simulator - Behavioral Simulation N/A N/A
AR# 56988
Date 12/16/2014
Status Active
Type General Article
  • Artix-7
  • Kintex-7
  • Virtex-7
  • Vivado Design Suite - 2013.2
Page Bookmarked