UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 65778

UltraScale Memory IP - [Xicom 50-38] xicom: Invalid memory type value detected

Description

When using the Vivado Hardware Manager to debug an UltraScale Memory IP (i.e. DDR4, DDR3, RLDRAM3 etc.), the following message is reported:



How do I resolve this?

Solution

This error message can occur if the system clock of the Memory IP is not running correctly prior to configuration of the FPGA is DONE.

The system clock must be running correctly, otherwise the Vivado Hardware Manager will not recover.

Revision History:

11/11/2015 - Initial Release

AR# 65778
Date Created 10/25/2015
Last Updated 11/17/2015
Status Active
Type General Article
Devices
  • Kintex UltraScale
  • Virtex UltraScale
Tools
  • Vivado Design Suite - 2015.2
IP
  • MIG UltraScale