We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 67902

Unroutable placement error on GT COMMON / GT Channel


When placing two protocols in the same quad, there can be placement problems. These are usually caused by both protocols instantiating the GT_COMMON block. 

There is only one block available and that causes the clash in placement as well as clock routing.

Place 30-510  Unroutable placement GTHE_COMMON / GTHE_CHANNEL...


When placing two protocols using the GT_COMMON in the same quad, follow the instructions in (Xilinx Answer 65228) How to share a COMMON block using UltraScale transceivers.

AR# 67902
Date 09/29/2016
Status Active
Type General Article
  • Kintex UltraScale
  • Kintex UltraScale+
  • Virtex UltraScale
  • Virtex UltraScale+
Page Bookmarked