UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 67971

2016.3 PetaLinux - Drop Bear is now enabled by default in the PetaLinux Root File System.

Description

Drop Bear is now enabled by default in the PetaLinux Root File System.

Solution

This Answer record covers how you would build and Test Dropbear.

1) Source the PetaLinux 2016.3 settings script.

2) Create a PetaLinux project.

petalinux-create --template zynqMP -t project -s Xilinx-ZCU102-v2016.3-final.bsp

3) Check whether the Dropbear application is enabled by default or not, it should enable by default.

petalinux-config -c rootfs

Filesystem Packages->console/network ->dropbear


 

4) Use the petalinux-build command

5) Boot the kernel

6) Once the kernel is up, log in using root as your username and password.

7) ssh to a remote system and again ssh back to the board from the remote machine using root as your username and password.

Log:
$ ssh panus8
Welcome to Ubuntu 14.04.4 LTS (GNU/Linux 3.13.0-32-generic x86_64)
panus8:~% ssh root@10.10.70.1
root@10.10.70.1's password:
root@Xilinx-ZCU102-2016_3:~#

AR# 67971
Date Created 09/28/2016
Last Updated 10/27/2016
Status Active
Type General Article
Devices
  • FPGA Device Families
  • Zynq UltraScale+ MPSoC
  • Zynq-7000
  • SoC
Tools
  • PetaLinux - 2016.3