There are no platform to publish, because the platforms are now in the Vitis installer.
Update important information:
The following base platforms are added to Vitis Installer. You can use them directly after installing Vitis.
Embedded platform source files and build instructions can be found at the github.
Demo applications: Please check Vitis Accel Example for demo applications for these platforms.
The ‘common image’ packages below contain a prebuilt Linux kernel and root file system that can be used with any Zynq™, Zynq™ MP or Versal board for embedded Vitis platform developers.
These files need to be copied to an SD flash card along with the platform specific boot image (boot.bin) available from the Vitis™ Embedded Platform page.
Also included is the ‘sysroot’ required for embedded Vitis platform application development. The sdk.sh script must to be used to setup the compressed Yocto Project SDK on a Linux development host properly.
Note: PetaLinux Tools installation is not necessary to use the common images. The licenses and sources used to create the common image content is provided below.