TE0712
The Trenz Electronic TE0712 is an industrial-grade FPGA module (100T, 200T) integrating the AMD Artix™ 7, 1 GByte DDR3 SDRAM, 32 MByte Flash memory for configuration and operation, and powerful switch-mode power supplies for all on-board voltages. A large number of configurable I/O's is provided via rugged high-speed stacking strips.
All this on a tiny footprint, smaller than a credit card, at the most competitive price.
Trenz Electronic modules in 4 x 5 cm form factor are fully mechanically and largely electrically compatible among them.
There are different base boards and a cooling solution available for this module. Latest documentation, design support files and reference designs with source files are available for download free of charge.
All modules produced by Trenz Electronic are developed and manufactured in Germany.
Key Features and Benefits
- 100 MBit Ethernet Phy in RMII Mode
- Programmable Low Jitter PLL
- On-board high-efficiency DC-DC converters
- Industrial-grade AMD Artix 7 (15T to 200T) SoM
- Up to 154 (75 differential pairs + 4 single-ended) single-ended FPGA I/O pins available on B2B strips
- 2 user LEDs (through system controller)
- Only 4 x 5 cm!
- Evenly spread supply pins for good signal integrity
- Supply voltages: either 3.3 V or 3.3 V and 5 V
- Plug-on module with two 100-pin and one 60-pin high-speed hermaphroditic stacking strips
- 1 GByte DDR 3 Memory
- 256 MBit (32 MByte) Quad-SPI Flash memory (for configuration and operation)
- 4 MGTs (multi gigabit transceivers)
What's Included
- Other assembly options for cost or performance optimization plus high volume prices available on request.