Access to the Subsystem
The Xilinx 10G/25G Ethernet MAC/PCS is provided in netlist form to licensed Ethernet customers only. The netlist is configured based upon user provided details. As described in the ordering information below, a confirmation email which includes configuration details will be sent to you.
The sole purpose of the Ethernet cores is to help you develop designs for Xilinx devices. Xilinx reserves the right to deny access to the Ethernet core products. The Ethernet cores are licensed under the Xilinx Core License Agreement.
To purchase any of these IP cores, contact your local Xilinx Sales Representative referencing the appropriate part number(s) in below table.
|Description||License Key||Part Number|
10G/25G Ethernet MAC + BASE-R (64-bit or 32-bit)
1G/10G/25G Switching Ethernet Subsystem
|Standalone 10G Ethernet MAC (64-bit)||x_eth_mac|
|25GBASE-KR (clause 108 RS-FEC, clause 74 FEC, AN)
10GBASE-KR (clause 74 FEC, AN)
|No key||Bundled with Vivado. No part number|
Note: Bundle includes Ethernet MAC IP. Current support in Vivado is for 10GE TSN only. For 25G inquiries, please email email@example.com.
*Includes access to 10 Gigabit Ethernet Media Access Controller - 10GEMAC which is recommended for existing UltraScale and 7 Series designs. For new UltraScale and UltraScale+ designs, please refer to the 10G/25G Ethernet Subsystem.
**Includes access to 10 Gigabit Ethernet PCS/PMA with FEC/Auto-Negotiation - 10GBASE-KR
As part of the notification for the Ethernet configuration, you will be asked to accept the Xilinx Core Project License Agreement. The email address associated with your Xilinx.com account must be a valid company email address in order for the netlist to be approved.
Once you have executed the Core License Agreement and the core has been configured to specification, the LogiCORE IP for Xilinx FPGAs will be provided to you.